ControlEx
by Hawke
The ControlEx range, suitable for control and low/medium power applications, it’s our most versatile option. With a wide range of insert configurations and rated up to 3KV in some cases this connector allows Hawke to tailor a connector solution to the customer’s needs. The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 750V.
by Hawke
The ControlEx range, suitable for control and low/medium power applications, it’s our most versatile option. With a wide range of insert configurations and rated up to 3KV in some cases this connector allows Hawke to tailor a connector solution to the customer’s needs. The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 750V.
- Easily Fieldwireable – Pin and socket inserts are front and back to assist wiring and avoid termination errors.; Internal Keyway Spacer – Eases accessibility for termination
- Locking Pin – Optional locking pin provides the facility for mated connectors to be permanently locked; Keying Position – Eliminates the possibility of misconnection of adjacent circuits.
- Running Coupler – Allows the connector to be installed onto a pre-assembled cable gland.
- Acme Thread at Mating Interface – Unique ACME thread offers a smooth and quick fully mating action.
- Fully Inspectable Flameproof Barrier – Provides direct inspection of the flameproof seal
- Anti-Rotation Device – helps to eliminate the possibility of the gland loosening
The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 750V. For order codes, dimesions, insert selection and dissipated wattage please download our datasheet. This can be found in the ‘Resources’ section of the page, under ‘Specification Documents’
Related products
453/RAC | Group I Mining Gland
by Hawke
The 453/RAC cable gland provides two independent seals on armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner cable sheath, with an additional IP seal on the outer sheath. This cable gland come with our Reversable Armour Clamp (RAC ring) for use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables. The cable gland is dual certified Exd and Exe and is suitable for installation in mining applications.
501/453/UNIV
by Hawke
The 501/453/Universal cable gland provides two independent seals on armoured, elastomer and plastic insulated cables susceptible to damage relating to cold flow. The first is a flameproof diaphragm seal on the inner cable sheath, the second an IP seal on the outer sheath. This cable gland comes with our Reversable Armour Clamp (RAC ring) for use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables. The cable gland is certified Exdb and Exeb and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas. Datasheet
FXCS-1B1-M
InstrumEx
by Hawke
The InstrumEx design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. This connector is available in 4, 8 and 9 way configurations , up to 2.5mm contacts and allows for a maximum of 250V, 10A. Made from brass nickel plated or stainless steel material it includes an integral cable glands which not only make the connector smaller it also allows it to be cheaper than its competitors while still maintaining the durability required in hazardous area applications.