EA303020 (11)
by Hawke
The Exe Easy Access range is designed to increase productivity. Its radical sloped face design and cut away sides for easier installation and maintenance than ever before.
by Hawke
The Exe Easy Access range is designed to increase productivity. Its radical sloped face design and cut away sides for easier installation and maintenance than ever before.
- Enclosure Box size: 332 mm X 317 mm.
- The EA’s innovative sloped lid design allows corrosion causing contaminants to naturally spill off.
- All 9 EA sizes follow industry sizes, so you can easily switch out or retrofit your current Enclosure for our EA range.
- The removable hinged lid with prevents the lid from being dropped from height.
- Turned out sealing face means spanner can brought into the enclosure parallel with gland locknuts allowing for an easier installation.
- Provides equal gasket compression for superior sealing performance.
- Amazing sealing performance provided by a single piece gasket concealed by the enclosure lid.
- The EA Range is designed to have Glands in the Bottom face to prevent ingress.
- The EA enclosure can be supplied with a 3mm bottom gland plate or alternatively in just sheet steel for easy onsite punching.
- Certified for Exe Increased Safety For use in Zone 1/2, 21/22: ATEX / IECEX / EAC TC RU / INMETRO.
The EA is suitable for a variety of applications including Oil and Gas, Pharmaceuticals, Renewable Energy, Agriculture and more. Click the ‘request a quote’ button to speak to one of our Specialists about how the EA-Series EA303020 could work for you.
Related products
501/453/UNIV
by Hawke
The 501/453/Universal cable gland provides two independent seals on armoured, elastomer and plastic insulated cables susceptible to damage relating to cold flow. The first is a flameproof diaphragm seal on the inner cable sheath, the second an IP seal on the outer sheath. This cable gland comes with our Reversable Armour Clamp (RAC ring) for use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables. The cable gland is certified Exdb and Exeb and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas. Datasheet
Arran
ControlEx
by Hawke
The ControlEx range, suitable for control and low/medium power applications, it’s our most versatile option. With a wide range of insert configurations and rated up to 3KV in some cases this connector allows Hawke to tailor a connector solution to the customer’s needs. The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 750V.
ENY-1
Killark’s sealing fittings offers a wide variety of seal off options for harsh hazardous locations. From small to large hub sizes to vertical and horizontal mounting, EY series can make for any sealing needs significant. Options are available in copper-free aluminum and Duraloy iron with superior electro-statically applied powder coating for the best corrosive resistance.
FXCS-1A15
PowerEx
by Hawke
The PowerEx range of connectors have been designed specifically for the extremely demanding requirements of higher power applications. Inserts are available with 1 to 4 contacts with a conductor acceptance range of between 50mm2 and 630mm2 operating up to 780A and 750V as standard. Other voltages available on special request.