321/R
by Hawke
The 321/R cable gland provides a seal and cable clamp on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland is Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.
by Hawke
The 321/R cable gland provides a seal and cable clamp on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland is Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas.
- Provides a cable retention seal onto the cables outer sheath.
- When used in Increased Safety applications, this cable gland may be used with braided cable where the braid and the outer sheath pass into the enclosure.
- The braid must then be suitably terminated inside the enclosure.
- Note: Braided cable is classed as unarmoured cable in the EN/IEC 60079 series standards for Exe applications.
- Cable clamp provides required clamp and cleat function.
Ordering Format [ Gland Type / Size / Male Thread / Female Thread / Material / Options]; Example: 321/R / C / M32 / Brass; Example with alternative seal option: 321/R / C / 1¼” NPT /Brass / S
Related products
453/RAC | Group I Mining Gland
by Hawke
The 453/RAC cable gland provides two independent seals on armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner cable sheath, with an additional IP seal on the outer sheath. This cable gland come with our Reversable Armour Clamp (RAC ring) for use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables. The cable gland is dual certified Exd and Exe and is suitable for installation in mining applications.
ENY-1-T
Killark’s sealing fittings offers a wide variety of seal off options for harsh hazardous locations. From small to large hub sizes to vertical and horizontal mounting, EY series can make for any sealing needs significant. Options are available in copper-free aluminum and Duraloy iron with superior electro-statically applied powder coating for the best corrosive resistance.
FibreEx Connector
by Hawke
Collection Name: FibreEx
In a digital age, one need is clear - the need to process ever-increasing amounts of data at lightning fast speeds. Fibre optics has long catered for this need in commercial applications but, until now, fibre technology has posed serious ignition risk in hazardous areas. The Fibre Ex range combines Hawke’s extensive experience in hazardous environments with specialist knowledge of Fibre Optic technology to safely bring power of Fibre Technology to Ex environments.
InstrumEx
by Hawke
The InstrumEx design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. This connector is available in 4, 8 and 9 way configurations , up to 2.5mm contacts and allows for a maximum of 250V, 10A. Made from brass nickel plated or stainless steel material it includes an integral cable glands which not only make the connector smaller it also allows it to be cheaper than its competitors while still maintaining the durability required in hazardous area applications.