153/X | American Series Gland
by Hawke
The 153/X cable gland provides a double compression seal and is for use with armoured marine shipboard jacketed or non-jacketed cable. The cable gland is for general purpose, industrial applications
by Hawke
The 153/X cable gland provides a double compression seal and is for use with armoured marine shipboard jacketed or non-jacketed cable. The cable gland is for general purpose, industrial applications
- Provides armour clamping for marine shipboard cable.
- Provides a seal on the cables inner jacket.
- Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure.
- Deluge seal is coloured black to indicate general purpose product.
- Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket.
Ordering Format [ Gland Type / Size / Male Thread / Female Thread / Material / Options]; Example: 153/UNIV / CX / 1″ NPT / Brass; Example with alternative seal option: 153/UNIV / C / 1 1″ NPT /Brass / S
Related products
501/453/UNIV
by Hawke
The 501/453/Universal cable gland provides two independent seals on armoured, elastomer and plastic insulated cables susceptible to damage relating to cold flow. The first is a flameproof diaphragm seal on the inner cable sheath, the second an IP seal on the outer sheath. This cable gland comes with our Reversable Armour Clamp (RAC ring) for use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables. The cable gland is certified Exdb and Exeb and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas. Datasheet
ENY-1
Killark’s sealing fittings offers a wide variety of seal off options for harsh hazardous locations. From small to large hub sizes to vertical and horizontal mounting, EY series can make for any sealing needs significant. Options are available in copper-free aluminum and Duraloy iron with superior electro-statically applied powder coating for the best corrosive resistance.
FXCS-1A15
FXCS-1B1-M
InstrumEx
by Hawke
The InstrumEx design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. This connector is available in 4, 8 and 9 way configurations , up to 2.5mm contacts and allows for a maximum of 250V, 10A. Made from brass nickel plated or stainless steel material it includes an integral cable glands which not only make the connector smaller it also allows it to be cheaper than its competitors while still maintaining the durability required in hazardous area applications.