800 Series
The 800 series is a range of stainless steel asymmetrical floodlights. These floods are designed for optimum light output and efficiency to ensure the minimum number of luminaires is required.Its suitable for low temperature applications (-40°C).
The 800 series is a range of stainless steel asymmetrical floodlights. These floods are designed for optimum light output and efficiency to ensure the minimum number of luminaires is required.Its suitable for low temperature applications (-40°C).
- Photometrically superior asymmetric reflector.
- Marine grade stainless steel body and toughened glass cover.
- Suspended cover front.
- Standard control gear for use with IEC lamps.
The 800 series is a premium range of stainless steel bodied asymmetrical beam floodlights suitable for tubular HPS and metal halide lamps from 70W to 400W and also 500W tungsten-halogen. Click the ‘Contact Us’ link above to get in touch with us and discuss how the 800 series range could work for you.
Related products
501/453/UNIV
by Hawke
The 501/453/Universal cable gland provides two independent seals on armoured, elastomer and plastic insulated cables susceptible to damage relating to cold flow. The first is a flameproof diaphragm seal on the inner cable sheath, the second an IP seal on the outer sheath. This cable gland comes with our Reversable Armour Clamp (RAC ring) for use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables. The cable gland is certified Exdb and Exeb and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas. Datasheet
Arran
ENY-1-T
Killark’s sealing fittings offers a wide variety of seal off options for harsh hazardous locations. From small to large hub sizes to vertical and horizontal mounting, EY series can make for any sealing needs significant. Options are available in copper-free aluminum and Duraloy iron with superior electro-statically applied powder coating for the best corrosive resistance.
InstrumEx
by Hawke
The InstrumEx design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. This connector is available in 4, 8 and 9 way configurations , up to 2.5mm contacts and allows for a maximum of 250V, 10A. Made from brass nickel plated or stainless steel material it includes an integral cable glands which not only make the connector smaller it also allows it to be cheaper than its competitors while still maintaining the durability required in hazardous area applications.